Canon Satera LBP5610 User Manual page 169

Table of Contents

Advertisement

<Auto Error skip>
168
Message
Cause
Remedy Replace the toner cartridge of displayed
Cause
Remedy Remove the replaced toner cartridge, hold
Cause
Remedy Set the paper source in this printer and the
Cause
Remedy
Cause
Remedy Load it in landscape orientation and print it
Cause
Remedy Replace the drum cartridge of displayed
Cause and Remedy
The toner cartridge of Y (Yellow), M
(Magenta), C (Cyan), or K (Black) has
reached the end of its life.
color with a new one.
Toner is solidified on the bottom of the toner
cartridge (a message is displayed
regardless of replacing a new toner
cartridge).
it with the tab facing down, shake it up and
down strongly again, evenly distribute the
toner inside the cartridge, and install it.
The paper that cannot be printed in
automatic 2-sided printing has been
specified.
paper size in an application to the standard
paper size, and print again.
The actual paper size that has been loaded
in the multi-purpose tray differs from the
setting of <
has been selected from an application or
the control panel.
Match the paper size that is loaded with <
].
In case of LIPS LX printer driver, when
setting <
options of the
<
>, custom paper of 297.0 mm long
or less has been loaded in portrait
orientation and printed.
again.
The drum cartridge of Y (Yellow), M
(Magenta), C (Cyan), or K (Black) cannot
have been used.
color with a new one.
> or <
> that
> or <
>, and press [
> or <
> in the
menu to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satera lbp5910Satera lbp5910f

Table of Contents