Table of Contents
Advertisement
Message
<Warning message>
<Auto Error skip>
Cause and Remedy
Cause
The toner cartridge of Y (Yellow), M
(Magenta), C (Cyan), or K (Black) is not
installed or is not installed properly.
Remedy Install the toner cartridge of displayed color,
or install it properly.
Cause
The toner cartridge of Y (Yellow), M
(Magenta), C (Cyan), or K (Black) is
nearing the end of its life.
Remedy You can continue printing for a while,
however have ready a new toner cartridge.
Replace the toner cartridge of displayed
color with a new one before printing a large
amount of data. After replacing, reset the
counter of the toner cartridge.
Cause
The toner cartridge of Y (Yellow), M
(Magenta), C (Cyan), or K (Black) has
reached the end of its life.
Remedy Press [
for a while, however have ready a new toner
cartridge. Replace the toner cartridge of
displayed color with a new one before
printing a large amount of data. After
replacing, reset the counter of the toner
cartridge.
Cause
The paper size or paper of the paper type
that cannot be fed from the multi-purpose
tray or paper cassette is specified.
Remedy When specifying the paper source, press [
] and set <
>.
Cause
The staples in the staple cartridge ran out.
Remedy Replace the staple cartridge with a new
one.
Cause
The staples ran out while stapling was
being performed.
Remedy Replace the staple cartridge with a new
one.
Cause
The staples were jammed.
Remedy Remove any jammed staples, then press [
].
Cause
The output tray is filled to the limit.
Remedy Remove the paper in the output tray.
]. You can continue printing
> to <
167
Advertisement
Table of Contents
