Verifying Operations After Disassembly/Reassembly; Methods - Canon BJC-3000 Service Manual

Part 2: Maintenance
3. VERIFYING OPERATIONS AFTER DISASSEMBLY/
REASSEMBLY

3.1 Methods

To confirm the operation of the printer after disassembly/reassembly, follow the
procedures below:
Service/Factory Test Print
Confirms the normal printing. Refer to Part 3: 2.1 Service Mode Operations (Page 3-8).
If the control board or the waste ink absorber have been replaced, the following
confirmations must be made in addition:
Replacement of the Control Board
Replacement of the Waste Ink Absorber Total amount of the waste ink absorbed is to
ROM version/machine name is to be correct on
the service/factory test printout, and the
amount of sheets passed and the total waste
ink absorbed are to be cleared. The nozzle
check pattern can be printed using the printer
driver.
be cleared on the service/factory test printout.
2-18
BJC-3000