Replacing The Headlight Bulb - Yamaha XT250Z Owner's Manual

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
1. Do not touch the glass part of the bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23814 1. Remove cowling
page 7-9.)
2. Remove the headlight unit by re-
moving the bolts.
ECA10660
1. Bolt
3. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
A. (See
1 1. Headlight coupler
2. Headlight bulb cover
1. Headlight bulb holder
7-33
1
2
4. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the burnt-out bulb.
1
5. Place a new bulb into position, and
then secure it with the bulb holder.
2
3
4
5
6
7
8
9