Brother PT-2420PC Service Manual page 57

Hide thumbs Also See for PT-2420PC:

Table of Contents

(11) Repeat tape feeding and cutting three times.

Then the feed cut test will automatically finish and the display will change to the following:

(12) With the tape cassette being loaded, click the Printing test 1 button.

The tape will feed and the display will change to the following:

Note: If any error message appears in the Results area, click the Stop printing test 1 button

and the Finish checking and exit button in this order to abort the test program.

Then check the tape cassette. If no tape cassette is loaded or the tape has run out,

replace the tape cassette with a new one and go back to step (12). If not so, go to the

recovery procedure given in Appendix 1.5.(1)

Table of Contents