Brother PT-2420PC Service Manual page 54

Hide thumbs Also See for PT-2420PC:

Table of Contents

The display will change to the following:

Note: If the Results area shows any message other than "The serial number was entered.",

then click the Finish checking and exit button to abort the test program. Check the

power supply and connection between your computer and PT-2420PC. Go to the

recovery procedure given in Appendix 1.5.

(6)

Click the Cassette sensor check button.

The display will change to the following:

Note: If the Results area shows any error message, click the Stop the cassette sensor

check button and the Finish checking and exit button in this order to abort the test

program. Go to the recovery procedure given in Appendix 1.5.

Table of Contents