Installing A Concurrent Kvm Feature Card - IBM HS21 - BladeCenter - 8853 User Manual

20. Press firmly on the captive screws and tighten them with a screwdriver,
If you have other options to install or remove, do so now; otherwise, go to
"Completing the installation" on page 34.

Installing a Concurrent KVM Feature Card

The following illustration shows how to install a cKVM Feature Card.
To install a cKVM Feature Card, complete the following steps:
28
BladeCenter HS21 Type 8853: Installation and User's Guide
alternating between screws until they are tight. If possible, rotate each two full
rotations at a time. Repeat until the screws are tight. Do not overtighten the
screws by using excessive force. If you are using a torque wrench, tighten the
screws to 8.5 to 13 Newton-meters (Nm) (6.3 to 9.6 inch-pounds).
1. Read the safety information that begins on page v and "Installation guidelines"
on page 15.
2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing
the blade server from the BladeCenter unit" on page 17 for instructions).
3. Carefully lay the blade server on a flat, static-protective surface.
4. Open the blade server cover (see "Opening the blade server cover" on page
18 for instructions).
5. If a Memory and I/O Expansion Blade is installed, remove it (see "Removing
an expansion unit" on page 19).
6. If a small-form-factor expansion card or a high-speed expansion card is
installed, remove it.
7. Touch the static-protective package that contains the cKVM Feature Card to
any unpainted metal surface on the BladeCenter unit or any unpainted metal
surface on any other grounded rack component; then, remove the card from
the package.
8. Locate the cKVM connector and orient the cKVM Feature Card.
9. Slide the right side of the card (the side of the card that is away from the
cKVM connector) between the two tabs at the right side of the expansion card
bracket; then, gently pivot the card into the connector.
Note: For device-driver and configuration information needed to complete the
installation of the cKVM Feature Card, see the documentation that
comes with the card.
cKVM feature card