Table of Contents
Advertisement
v You have followed the cabling instructions that come with optional adapters.
v You have replaced a failed fan as soon as possible.
Handling static-sensitive devices
Attention:
devices. To avoid damage, keep static-sensitive devices in their static-protective
packages until you are ready to install them.
Notes:
1. If you are instructed to return a device or component, follow all packaging
2. Use product-specific electrostatic-discharge procedures when they exceed the
3. Make sure that the electrostatic-discharge-protective devices that you use have
To reduce the possibility of damage from electrostatic discharge, observe the
following precautions:
v Limit your movement. Movement can cause static electricity to build up around
v The use of a grounding system is recommended. For example, wear an
v Handle the device carefully, holding it by its edges or its frame.
v Do not touch solder joints, pins, or exposed circuitry.
v Do not leave the device where others can handle and damage it.
v While the device is still in its static-protective package, touch it to an unpainted
v Remove the device from its package and install it directly into the computer
v Take additional care when handling devices during cold weather. Heating reduces
30
IBM IntelliStation M Pro Type 9229: User's Guide
Static electricity can damage the computer and other electronic
instructions. Use any packaging materials for shipping that are supplied to you.
requirements that are specified in this document.
been certified (ISO 9000) as fully effective.
you.
electrostatic discharge wrist strap, if one is available.
metal part of the computer for at least 2 seconds. This drains static electricity
from the package and from your body.
without setting down the device. If it is necessary to set down the device, put it
back into its static-protective package. Do not place the device on the computer
cover or on a metal surface.
indoor humidity and increases static electricity.
Advertisement
Table of Contents
