PCI adapter card support assembly
The illustrations in this document might differ slightly from your hardware.
To remove the PCI adapter card support assembly:
1. Power off the server.
2. Disconnect all external cables from the server.
3. Remove the cover. See "Removing the cover, door, and bezel" on page 48.
4. Disconnect any adapter cables from the adapter.
5. Remove any installed adapters, noting the installed location of each; be sure to
6. Press the arrows on the tab to release the Adapter support bracket retaining
7. Carefully slide out the adapter support bracket to remove.
102
Hardware Maintenance Manual: xSeries 232, Type 8668
Note:
v Read "Before you begin" on page 47.
v Be familiar with all safety information at "Safety information" on page 133.
Adapter
support
bracket
Adapter support
bracket retaining clip
use the same location for each one upon reinstallation.
clip.