Table of Contents
Advertisement
Installing the bezel (rack)
Note: The illustrations in this document might differ slightly from your hardware.
To install the bezel:
1. Place the tabs on the left side of the bezel in the slots at the left front of the
2. Press the right end of the bezel toward the server until the bezel clicks into
Connecting external options
If you install a SCSI adapter, you can attach a SCSI storage expansion enclosure to
the server. You can attach additional external options to the input/output
connectors on the rear of the server. See "Input/output ports" on page 86 for
additional information.
To attach an external device:
1. Read "Before you begin" on page 47 and the documentation that comes with
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the option to prepare it for installation
server.
place.
the options.
and to connect it to the server.
Note: If you are attaching a SCSI device, see "Ultra160 SCSI ports" on page 93
for SCSI ID and cabling information.
Bezel
Installing options
85
Advertisement
Table of Contents
