5.3.3.6. Removing The Hopper Assembly - Brother DP-525CJ Service Manual

REPAIR
Mechanical

5.3.3.6. Removing the Hopper Assembly

(1) Unsnap the hook at the left side of the hopper assembly to disengage it from the
PF base assembly. Turn the hopper assembly until the oval pin of the PF base
assembly is aligned with the cut-out in the hopper assembly fitting hole. Lift the
hopper assembly away from the PF base assembly.
(2) Remove the hopper springs.
(3) Remove the change spring.
(4) Unsnap the hook in the hopper assembly to disengage the ACF change lever from
the hopper assembly. Then, turn the ACF change lever up in the counterclockwise
direction to remove it from the hopper assembly.
(5) Make sure that the pin on the ACF change shaft has cleared the hook in the hopper
ass'y. Then, turn the ACF change shaft to align the recess of the ACF change
shaft with the cut-out in the shaft support of the hopper assembly, and remove the
ACF change shaft from the hopper assembly.
4-38
SERVICE MANUAL