Download Print this page

Brother DP-525CJ Service Manual: Table 3.2 Fdd Special Test Error Stage Codes

Word processor.
Hide thumbs

Advertisement

REPAIR
SERVICE MANUAL
NOTES:
After completing the disk drive test, the carriage automatically returns and the test
result is printed:
SERIAL NO.:
If normal:
If disk switch is defective:
If write-protect switch is defective: DISK ERROR 03
If other read/write errors occur:
If an error is detected, a two-digit error code is printed: the first digit is the stage
number in the test at which the error was detected; the second digit is the type of error
as described in the following tables.
STAGE NO.
0
1
2
3
4
5
6
7
8
9
A
B
C
(if it was entered)

Table 3.2 FDD Special Test Error Stage Codes

Output of ABORT command
Output of SPECIFY command
Switching drive motor ON
Checking write protect
Recalibration
Reading SSB3 by means of CHECK DRIVE STATUS command and
checking status of track 0 signal
Seeking cylinder 1
Reading SSB3 by means of CHECK DEVICE STATUS command and
checking status of track 0 signal
Seeking cylinder 0
Formatting cylinder 79
Formatting cylinder 0
Seeking cylinder 39
Formatting cylinder 39
Seeking cylinder 79
Formatting cylinder 79
Writing data for checking purposes (DB6DB6DB...)
Seeking cylinder 39
Writing data for checking purposes (B6DB6DB6...)
Seeking cylinder 0 (command = RECALIBRATE)
Writing data for checking purposes (6DB6DB6D...)
Reading and checking cylinder 0 data
Seeking cylinder 39
Reading and checking cylinder 39 data
Seeking cylinder 79
Reading and checking cylinder 79 data
Recalibration
Switching drive motor OFF
3-39
DISK TEST OK
DISK TYPE 0 (2DD)
DISK TYPE 1 (2HD)
DISK ERROR 01
DISK ERROR 0F
DESCRIPTION
Troubleshooting

Advertisement

Troubleshooting

   Also See for Brother DP-525CJ

   Related Manuals for Brother DP-525CJ

Comments to this Manuals

Symbols: 0
Latest comments:
  • brian aaron Jan 27, 2017 03:48:
    1-26-2017
    ​I have a brother dp 540cj and it has a built in diskette drive.
    I have a ibm thinkpad latop. I connected a Memorex external usb floppy drive to the ibm thinkpad laptop. i'm copying 3 files from the ibm thinkpap (notepad) to the square 1.44 mb diskette. no problem, the 3 files were copied to the diskette.
    ​I turn on the brother dp 540cj, select file manager, insert the square diskette. the brother dp 540cj open only the file names on the disk. I try to open word text on either of the 3 files on the disk and the brother dp 540cj don't open the word text in any of the 3 files. I have been trying for several days to open the word text on the files using the brother dp 540cj and don't have any further instructio​ns for this problem. I tried saving the file names to all coding - Unicode, ansi utf-8 and can't fix the electronic problem.
    m​y email address is snowwash@j​uno.com