Download Print this page

Brother DP-525CJ Service Manual Page 76

Word processor.
Hide thumbs

Advertisement

REPAIR
SERVICE MANUAL
Points to Check
(2) "Incorrect spec!"(when power on)
Do the soldering points for the
Country Code Change-Over
circuit match the ROM?
(3) "RAM down" (RAM cannot be
accessed at power on)
Is the RAM installed correctly?
Probable Cause
Solder point setting is
wrong, or the ROM
(#11,#12) is incorrectly
mounted.
RAM improperly
installed (e.g. solder
bridge) or defective
RAM(#10).
3-13
Troubleshooting
Corrective Action
Replace the Main
PCB.
Replace the Main
PCB.
Repair
Set the correct
solder point, or
replace the
ROM.
Reinstall/replac
e the
RAM(#10).

Advertisement

Troubleshooting

   Also See for Brother DP-525CJ

   Related Manuals for Brother DP-525CJ

Comments to this Manuals

Symbols: 0
Latest comments:
  • brian aaron Jan 27, 2017 03:48:
    1-26-2017
    ​I have a brother dp 540cj and it has a built in diskette drive.
    I have a ibm thinkpad latop. I connected a Memorex external usb floppy drive to the ibm thinkpad laptop. i'm copying 3 files from the ibm thinkpap (notepad) to the square 1.44 mb diskette. no problem, the 3 files were copied to the diskette.
    ​I turn on the brother dp 540cj, select file manager, insert the square diskette. the brother dp 540cj open only the file names on the disk. I try to open word text on either of the 3 files on the disk and the brother dp 540cj don't open the word text in any of the 3 files. I have been trying for several days to open the word text on the files using the brother dp 540cj and don't have any further instructio​ns for this problem. I tried saving the file names to all coding - Unicode, ansi utf-8 and can't fix the electronic problem.
    m​y email address is snowwash@j​uno.com