Set Format Attribute (A) - Brady TLS PC Link Programmer's Manual

Set Format Attribute (A)

This command specifies the type of format operation and remains in effect until
another format command is specified or another label format has begun
(<STX>L). Each label format defaults to attribute 1 - XOR.
An
Where:
n-
1 = XOR Mode:
2 = Transparent Mode:
3 = Opaque Mode:
5 = Inverse Mode:
Sample:
<STX>L
A2<CR>
190001001000100PCLINK<CR>
190001001100110PCLINK<CR>
E<CR>
The above sample sets the printer to transparent mode and prints one label
showing overlapping text.
Feedback possibilities: 0,1,2
30
is either a 1, 2, 3 or 5
This is the default mode regions, where text
strings, images, or barcodes intersect will not
be printed, (an odd number of overlapping
objects will print).
This optional mode allows the intersection of
text strings, images, and barcodes to print. This
allows the user to print fields on top of one
another. (i.e., the letter I printed on top of a
dash would combine to show a plus).
Interacting text is obliterated by the text
formatted last, each character cell is treated as
opaque.
This mode allows inverse (white on black)
printing. A proportionally sized border and
background are printed as in a photographic
negative.
TLS PC Link
TM
Programmer's Guide