Common Configuration - PSC PowerScan RF System Manual

Common
Configuration
Systems Manual
Feature is applicable to scanner and Base Station.
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 33.
NOTE
When this option is enabled, the Base Station attempts to share its con-
figuration with a scanner as that scanner links to the Base Station. If,
during linking, a scanner's configuration file does not match the Base
Station's current settings, the Base Station attempts to transmit to the
scanner and overwrite the configuration file with its own.
Since a new/replacement scanner may have been
shipped with a custom configuration or may have
been modified with other special programming, it
may not be desirable to download a potentially
older configuration from an existing Base Station.
CAUTION
In this case, consider uploading the scanner's
newer configuration to the Base Station instead.
If the need is to share the scanner's configuration files to the Base Sta-
tion, use the Transmit Scanner Configuration to Base Station bar code.
Base Station on page 33.
SET -------------------------------------------
ENABLE Common
Configuration ---------
65