Vertical (Wall) Mounting - PSC PowerScan RF System Manual

Figure 15. Mounting Using Flanges or Two-sided Tape
1
1. Mounting Flanges (4)
2. 4 Screws (provided)
Mounting
Using Two-
Sided Tape
Vertical (Wall)
Mounting
Systems Manual
You can also affix the Base Station to a surface using the two-sided tape
strips provided with the unit. Simply remove the backing from one
side of the strips and apply them to the bottom of the Base Station as
shown in Figure 15b. Remove the remaining backing from the tape,
then position and firmly press the unit against a smooth, clean surface
in the orientation desired.
The Base Station can be mounted vertically using the same methods as
horizontal mounting (see previous section):
• Using Key Slots
• Using Mounting Flanges
Mounting Using Two-Sided Tape
•
1. Since mounting using this method offers less secure attachment, verify that your tape installation
is robust enough for your application.
2
3
a b
3. Two-sided Tape Strips
4. Backing
1
4
29