PSC PowerScan RF System Manual page 49

RF When to
Beep
Systems Manual
Several options are available to specify how the RF handheld scanner
will beep to indicate a good read. Settings are based on the enable/dis-
able status desired for three selectable beep indications:
• Good Read Beep
Acknowledgement (ACK) Beep
•
• Transmission Error Beep
The available options are described and numbered in Table 7 to corre-
spond with the programming bar codes provided for this feature.
These settings supersede any settings made using
the generic "When to Beep" feature listed in the
PowerScan Programming Manual.
NOTE
Table 7. RF When to Beep Options
Good Read
#
Beep
0 Disabled
1 Disabled
2 Disabled
3 Disabled
4 Enabled
5 Enabled
6 Enabled
7 Enabled
Feature is specific to scanner ONLY
ACK Beep
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Enabled
Transmission Error
Beep
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
45