PSC PowerScan RF System Manual page 67

Drop Links on
Reset Option
Systems Manual
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 33.
NOTE
When enabled, this option causes the Base Station to drop its links to
any and all scanners whenever power is reset/cycled. This provides a
simple way to ensure that when reconfiguring a system, scanners do
not need to be located and individually unlinked.
SET -------------------------------------------
Drop all links on reset
(ENABLE)
Do not drop all links on reset
(DISABLE)
END ------------------------------------------
Feature is specific to Base Station ONLY
---------
---------
63