RF Beeper
Volume
Systems Manual
The volume at which the beeper sounds for ACK, transmission error,
link, or unlink beeps (but not the good read beep
this setting. Select volume #1 (25% duty cycle), volume #2 (35% duty
cycle), or volume #3 (50% duty cycle).
SET -------------------------------------------
RF Beeper Volume #1
RF Beeper Volume #2
RF Beeper Volume #3
END ------------------------------------------
1. Good read beep volume is selectable via the features available in the PowerScan Programming
Manual (P/N R44-1840). See References for information about acquiring other manuals.
Feature is specific to scanner ONLY
---------
---------
---------
1
) are all affected by
47