Table of Contents
Advertisement
Series 9000E Scanner/Decoder
Inspect all items received for any visible damage that may have been
incurred during shipping. Of particular interest is the glass window at the
front of the scanner unit.
If any items are missing or damaged, immediately notify the carrier and
Customer Administration at PSC Automation, Inc. Call 1-800-843-2700.
Maintain all shipping documentation, containers, and packing materials
until discrepancies are cleared.
MOUNTING PROVISION
The fundamental mounting of the scanner is provided for by eight
through holes in the housing designed to accommodate #6 mounting
hardware.
Mounting brackets may be fabricated by user if deemed
necessary. Figure 3-1 illustrates the overall dimensions of the scanning
unit as well as the position of the mounting holes relative to the scanning
beam location. The installation of the Series 9000E Scanner/Decoder is
straight forward and will be successful if some simple guidelines are
followed.
Install scanner unit in locations that are:
Protected from collisions with packages that may be passing close
to the scanner.
A reasonable operating environment with a temperature between 0
and 50 degrees centigrade (32 and 122 degrees Fahrenheit) and
away from extreme heat sources.
Not in a high electrical noise area; for example, near large AC
motors or solenoids.
Away from high vibration areas.
Easily accessible for service and adjustment.
3-2
Advertisement
Table of Contents
