Bell and Howell Sidekick 1200 Installation Manual page 14

Sidekick Installation Manual
5
When installation of the ISIS/TWAIN driver completes, the following will occur:
5.a: If an ISIS/TWAIN driver has never been
loaded on the host PC in the past, a Setup
Complete screen will display and ask whether or
not you want to reboot the host PC.
Click the YES button (leave the Sidekick
Installation CD in the CDROM drive).
Log back onto the host PC following the steps
found under Software Installation
and continue with the Step 3 Virtual Rescan
Install Software process.
Page 10 of 14
5.b: If an ISIS/TWAIN driver has been loaded on
the host PC in the past, a Setup Complete screen
will display confirming the installation is complete.
Click the Finish button.
Continue with the
Install Software process.
in this manual,
of the
Step 3 Virtual Rescan of the
S006970 Rev B