Assigning The [1]-[8] Knob Functions In The Play Screen; Switching Settings With The Number Pedals - Boss Audio Systems GT-100 Owner's Manual

Assigning the [1]–[8] Knob
Functions in the Play Screen
Here's how to assign the functions of the [1] – [8] knobs when they
are operated in the Play screen.
1.
Press the [SYSTEM] button .
2.
Turn knob [4] to select "KNOB SETTING" .
3.
Use knobs [5]–[8] to select the functions of knobs [1]–[4] .
4.
Press the PAGE [ ] button to access the next page .
5.
Use knobs [5]–[8] to select the functions of knobs [5]–[8] .
Pedal Settings (Control/Expression)
Switching Settings with the Number
Pedals
The GT-100 includes a function that allows you to turn the tuner
on and off, switch preamp channels, and perform other tasks by
pressing the pedal with the same number as the currently selected
patch.
* You can switch the following functions in any condition other
than the Manual Mode (p. 17).
1.
Press the [SYSTEM] button .
2.
Turn knob [4] to select "PLAY OPTION . "
3.
Use knob [8] to select the value for NUM PEDAL SW .
Value Explanation
OFF
Not used.
TUNER Switches the tuner on and off.
Ch . A/B Switches between preamp channels A and B.
OD SOLO Switches to tones suited to solo performance.
A/B SOLO Switches the preamp SOLO on and off.
A&B SOLO Switches SOLO on or off for both preamp channels A and B.
35