Quick Guide - Boss Audio Systems GT-100 Owner's Manual

Quick Guide

1
Getting Ready
This Quick Guide explains basic operation.
For details, refer to the pages shown by the
1
Connect your guitar and amp.
Connect your guitar and amp .
Minimize the volume!
Turn off the power to the GT-100 and your amp, and set the volume to the
minimum.
2
Turn on the power
1.
Connect the AC adaptor .
2.
Turn the [POWER] switch on .
3.
Turn on the power to your guitar amp .
* With the factory settings, the GT-100 will automatically
be switched off 10 hours after you stop playing or
operating the unit. If you don't want the unit to turn off
automatically, change the "AUTO OFF" setting to "OFF" as
described on p. 42.
Note
The settings you were editing will be lost when the unit
is turned off. If you want to keep your settings, you must
save your settings before turning the unit off.
Convenient tuner function
1.
Press
2.
Play an open string, and tune it so that only the center
indicator in the screen is lit .
3.
When you're finished tuning, press
simultaneously once again .
8
page XX symbol.
page 24
For details, see
simultaneously .
3
Adjust the volume
Use
Set the reference pitch
page 22
For details, see
to adjust the volume .
page 24
For details, see
Set the OUTPUT mode(p. 24)