Boss Audio Systems GT-100 Owner's Manual page 18

7
Advanced: Phrase Loop
By operating the [PHRASE LOOP] pedal, you can carry out recording and playback in real
time to create layered performances.
Enter Phrase Loop mode
About Phrase Loop
The recording time is 38 seconds in monaural.
To make settings for Phrase Loop, see "Setting Phrase Loop" (p. 32).
About the pedal's indicator
The pedal's indicator will blink or light in a different
pattern according to the Phrase Loop status.
Status
Standby
Recording/Overdub
Playback
Clear/Exit
To clear the phrase and exit Phrase
Loop, hold down the pedal for at
least two seconds while stopped.
* The recorded content will be erased when you exit
Phrase Loop.
* The recorded content will not be saved.
18
Quick Guide
Hold down the pedal for two seconds or
longer; the Phrase Loop function will turn
on, and will be in the standby condition.
Record
Press the pedal once again,
and record your guitar
performance.
Indicator illumination pattern
...
...
(stays lit)
Play back the loop.
Pressing the pedal will switch to
overdubbing.
Record additional layers
while playing back the
Indicator
loop.
Press the pedal to switch
: lit : unlit
to playback.
Hold down two seconds or longer
To stop, press the pedal twice in
succession during overdubbing or
loop playback.
* Press the pedal twice within one second.
Each time you press the pedal, the
right display will show the phrase
loop status for a predetermined
amount of time.
Loop playback
Overdub
Press twice
Stop