Boss Audio Systems GT-100 Owner's Manual page 17

6
Advanced: Manual Mode
This section explains more advanced uses of the GT-100.
What Is Manual Mode?
Manual mode lets you use the GT-100's pedals to turn on/off
individual effects within a patch.
You can use this just as though you were individually switching
on/off several compact effects units in a pedalboard.
* In Manual mode, P.LOOP PEDAL and ACC/CTL PDL, which
can be assigned to ASSIGN 1--8 (p. 37) under "Pedal Settings
(Control/Expression)" (p. 33), will be invalidated.
Using the pedals to turn each effect on/off (Manual mode)
1.
Press
2.
Use the pedals to turn each effect on/off .
3.
To exit Manual mode, press
* If PHRASE LOOP PEDAL FUNC (p. 32) is set to "PHRASE LOOP, " you won't be able to assign anything other than PHRASE LOOP ("PL") to the
[PHRASE LOOP] pedal. If you want to assign any other function, you must turn PHRASE LOOP PEDAL FUNC off.
simultaneously .
simultaneously once again .
Quick Guide
On/off status
Pedal name
Effect name
You can assign the
desired effects unit
to each pedal.
Use the pedals to turn each effect on/off.
17