Using The Metronome; Selecting A Tone (Patch Change); How A Patch Is Structured - Boss Audio Systems GT-100 Owner's Manual

6.
Simultaneously press pedals [1] and [2] to return to the
Play screen .
You can also return to the Play screen by pressing the [EXIT] button.
MEMO
You can also turn the tuner on/off by pressing the number pedal
of the same number as the currently selected patch. For details,
refer to "Adjusting the [EXP] pedal" (p. 36)"Switching Settings with
the Number Pedals" (p. 35).

Using the Metronome

1.
Simultaneously press pedals [1] and [2] .
The tuner function and the metronome function will turn on. The
right display will show the "METRONOME" screen.
2.
Use knobs [5]–[8] to specify the metronome settings .
Parameter Value
[5] TEMPO
40–250
1/1–8/1,
1/2–8/2,
[6] BEAT
1/4–8/4,
1/8–8/8
[7] OFF/ON OFF, ON
[8] LEVEL 0–100
* The metronome sound is output through the OUTPUT jack and
the PHONES jack.
* Changing the TEMPO will also change the MASTER BPM. For the
detail on MASTER BPM, refer to "GT-100 Parameter Guide" (PDF
file).
3.
Simultaneously press pedals [1] and [2] to return to the
Play screen .
You can also return to the Play screen by pressing the [EXIT] button.
Explanation
Specifies the tempo of the
metronome.
Selects the time signature.
Turns the metronome on/off.
Adjusts the volume of the
metronome.

Selecting a Tone (Patch Change)

A combination (or set) of effects together with a group of
parameter settings is called a "patch. "

How a Patch Is Structured

The GT-100 can store 400 different patches in memory, organized
by bank and number as shown below.
Preset Bank P50
User Bank
User Bank
Preset Bank P01
User Bank U50
User Bank
User Bank
User Bank U01
User Banks (U01–U50)
Newly created effects settings are saved in the User banks. Patches
in these banks are called "User patches. "
A "U" appears in the display when a User patch is selected.
Bank
Preset Banks (P01–P50)
The Preset banks contain effect settings that make full use of the
features the GT-100 has to offer. The patches in these banks are
called "Preset patches. " When you change the settings of a Preset
patch, save the result as a User patch. Preset patches cannot be
overwritten.
A "P" appears in the display when a Preset patch is selected.
Bank
Outputting Sounds
Number
Number
25