Table of Contents
Advertisement
Chapter 5
Creating and Printing Labels
This chapter provides information on creating and printing labels, including information on changing
font sizes and bold status. It also provides instructions for adding symbols and international characters
to a label.
Creating a Basic Label
Follow these steps to create and print a basic label. For details and information on advanced features,
refer to the following chapters of this manual.
Note: See the IDXPERT
instructions on creating a variety of labels.
Step 1.
Press POWER.
Step 2.
Press FONT SIZE.
The display screen shows the
current font size and bold status.
Step 3.
Use the up/down arrow softkeys—or the arrows on your keypad—to select a font
size.
[▲] [▼]
Note: See the Font Size Chart on page 31.
Step 4.
Press the [BOLD] softkey to toggle bold ON or OFF.
Step 5.
Press ENTER.
Step 6.
Type Text. Press ENTER after each line of text.
Note: You may also select from a list of symbols to include on your label. See the Symbol
Library on page 33.
Step 7.
Press PRINT.
For multiple copies, press FUNCTION + PRINT/MULTI-PRINT.
Step 8.
Pull the cutter lever down to cut the label.
User's Manual
Handheld Labeler Sample Label Tutorial for step-by-step
TM
FONT:10 pt
Bold: OFF
11
Advertisement
Table of Contents
