Error And Warning Messages - Brady Bradyprinter 2461 Operator's Manual

6.2 Error and Warning Messages

When the printer detects a (potential) problem, a message is displayed and an
Error indicator (see Section 4.0.4) will be illuminated. There are two types of
indicators:
Error Indication – the Error indicator 'fast flashes' with message.
Warning Indication – the Error indicator 'slow flashes' with message.
The Error and Warning Messages are listed in the following two tables,
including a brief description of each and possible solution(s).
; ;
Note: After the printer enters an error condition, the FEED key must be
pressed to clear the error.
Error Messages:
Displayed Message
" " 
 " 
" " 
(Continued next page)
Description
The printer has
detected an analog
to digital circuit
converter failure.
The printer has
detected a cutter
mechanism fault.
The printer has
detected a Direct
Memory Access
failure.
Possible Solution(s)
Try cycling the printer power
'Off' and 'On'. If the fault
does not clear, call for
service.
Try cycling the printer power
'Off' and 'On'.
WARNING! Use extreme
care: Turn 'Off' and
unplug power before
examining the cutter.
Make sure the cutter option is
properly installed.
Carefully examine the cutter
for obstructions.
Try cycling the printer power
'Off' and 'On'. If the fault
does not clear, call for
service.
77