Speed Dialing; Abbreviated Dialing - Sanyo Mirro User Manual

Speed Dialing

You can store up to 98 numbers in your phone's speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone number
beforehand. See "Assigning Speed Dial Numbers" on page 46.
To use speed dial for locations 2-9:
From standby mode, press and hold the appropriate key for
approximately two seconds.
To use speed dial for locations 10-99:
From standby mode, press appropriate keys, and then press
.
The display confirms that the number has been dialed when it
shows "Connecting...".

Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either
of the following abbreviated dialing features.
Contacts Match – Retrieve any number saved in your Contacts
by entering the four or more digits of any part of the number.
Prepend – Prepend the first five or six digits (for example, the
area code and prefix) to any four or five digits you enter.
To activate the Prepend feature:
1. Press
> Settings/Tools > Settings > Others > Call Setup >
Abbrev. Dial .
2.
Select Prepend > On .
3.
Enter a five- or six-digit number and press
To place a call using Abbreviated Dialing:
1.
Enter the four or more digits of any part of a Contacts entry's
phone number to use the Contacts Match feature.
– or –
Enter the last four or five digits of the number to use the
Prepend feature.
Note Contacts Match will not retrieve numbers if you enter 911 or
reserved three-digit service numbers such as 411 or 611.
2.
Press to call the displayed number.
If there are two or more matched numbers in your Contacts,
a list is displayed. Highlight the name or the phone number
you want to call, and then press
.
to place a call.
2A. Phone Basics 19