Making Calls; Answering Calls; Dialing Options - Sanyo Mirro User Manual

Making Calls

1.
Make sure your phone is on.
2.
Enter a phone number from standby mode. If you make a
mistake while dialing, press
3.
Press .
4.
Press when you are finished.
Tip To redial your last outgoing call, press
and then press
TALK
When making calls off the Network, always dial using 11 digits (1
+ area code + phone number).
You can also place calls from your phone by speed dialing
(page 19), by using Automatic Speech Recognition (page 54), and
by using your History listings (page 40).

Dialing Options

When you enter numbers in standby mode, you can see available
dialing options by pressing OPTIONS (right softkey). To select an
option, highlight it and press
Save to save a phone number in your Contacts. (See "Saving a
Phone Number" on page 17.)
14 2A. Phone Basics
to erase the numbers.
, highlight the call,
TALK
again.
.
Contact Details to view the detailed information of a Contacts
entry when the number you have entered is already saved in
your Contacts.
Hard Pause to insert a hard pause. (See "Dialing and Saving
Phone Numbers With Pauses" on page 18.)
2-Sec. Pause to insert a two-second pause. (See "Dialing
and Saving Phone Numbers With Pauses" on page 18.)
Tip You can also send a text message, or Media Mail when the left
softkey displays
SEND MESSAGE

Answering Calls

1.
Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2.
Press to answer an incoming call. (Depending on your
settings, you may also answer incoming calls by pressing
other keys. See "Call Answer Mode" on page 34.)
Your phone notifies you of incoming calls in the following ways:
The phone rings or vibrates.
The backlight illuminates.
The screen displays an incoming call message.
.