Displaying Contacts Details; Adding A New Contacts Entry; Editing A Contacts Entry; Creating A Group - Sanyo Mirro User Manual

Displaying Contacts Details

1.
From the Contacts list, highlight an entry and press
2.
Highlight any data field and press
field will appear, if applicable.
Note If you select a group in step 1, entries or phone numbers
belonging to the group are displayed.

Adding a New Contacts Entry

From standby mode, press CONTACTS (right softkey) > 
1.
Add New... > New Contact .
2.
Enter a name for the new entry and press the navigation key
down.
3.
Enter the phone number for the entry and press
4.
Highlight a number type for the entry ( Mobile , Home , Work ,
Pager , Fax , or Other ) and press
5.
Add other information (email address, URL, street address,
etc.).
6. Press DONE (left softkey).
.
. Menu options for that
.
.
After you have saved the number, the new Contacts entry is
displayed.
Tip
ICE – In Case of Emergency
To make it easier for emergency personnel to identify important
contacts, you can list your local emergency contacts under "ICE"
in your phone's Contacts list. For example, if your mother is your
primary emergency contact, list her as "ICE–Mom" in your
Contacts list. To list more than one emergency contact, use
"ICE1–___," "ICE2–___," etc.

Editing a Contacts Entry

1.
From the Contacts list, highlight the entry you want to edit
and press OPTIONS (right softkey) > Edit Contact .
2. Select the field you wish to edit, and then add or edit the
information and press
3.
Press DONE (left softkey).

Creating a Group

You can create a group by assigning Contacts entries as members
and then naming the new group.
.
2D. Contacts 43