Setting Up Service; Setting Up Your Phone; Activating Your Phone; Setting Up Your Voicemail - Sanyo Mirro User Manual

1A. Setting Up Service
Setting Up Your Phone (page 2)
Activating Your Phone (page 2)
Setting Up Your Voicemail (page 2)
Getting Help (page 3)

Setting Up Your Phone

1.
Install the battery.
Insert the battery into the opening on the back of the
phone, making sure the connectors align (
press it down ( ).
Position the battery cover and slide it upward until it snaps
into place ( ).
2 1A. Setting Up Service
2.
Press
If your phone is activated, it will turn on, search for service,
and enter standby mode.
If your phone is not yet activated, see "Activation Kit" for
more information.
3.
Make your first call.
Use your keypad to enter a phone number.
Press
Note

Activating Your Phone

), and gently
To activate your new Boost phone, please refer to your "Activation
Kit".

Setting Up Your Voicemail

Your phone automatically transfers all unanswered calls to your
voicemail, even if your phone is in use or turned off. You should
to turn the phone on.
.
Your phone's battery should have enough charge for your phone
to turn on and find a signal, set up your voicemail, and make a
call. You should fully charge your battery as soon as possible.
See "Charging the Battery" on page 12 for details.