Settings; Display Settings - Sanyo Mirro User Manual

2B. Settings
Display Settings (page 25)
Volume Settings (page 27)
Ringtone Settings (page 28)
Messaging Settings (page 30)
Airplane Mode (page 31)
TTY Use With Service (page 32)
Using the Hearing Aid Device Compatibility Function (page 33)
Phone Setup Options (page 33)
Security Settings (page 35)

Display Settings

Changing the Wallpaper
You can set a wallpaper to display while in standby mode.
1.
Press > Settings/Tools > Settings > Display > Wallpaper .
2.
Select a wallpaper option by pressing the navigation key up
or down, and select a wallpaper.
3. Press .
Changing the Brightness
You can adjust the brightness on the main screen. When the
Power Save Mode is on, and when the Backlight Dim setting is
Always Dim, you cannot change this setting.
1.
Press > Settings/Tools > Settings > Display > Brightness .
2.
Highlight a brightness level and press
Changing the Backlight Time Length
Select how long the main screen and keypad remain backlit after
any keypress is made.
1. Press > Settings/Tools > Settings > Display > Backlight >
Backlight Dim or Backlight Off.
If you select Backlight Dim , select Always Bright , Always Dim ,
or a preset length of time to elapse before the screen
backlight dims.
If you select Backlight Off , select a preset length of time to elapse
before the screen and keypad backlights turn off. (When you
select Always Bright for the Backlight Dim setting above, the
keypad backlight will turn off after about one minute.)
.
2B. Settings 25