Dialing From The Contacts List; Plus Code Dialing - Sanyo Mirro User Manual

Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
Hard Pause sends the next set of numbers when you press
2-Sec. Pause automatically sends the next set of numbers after
two seconds.
Note You can have multiple pauses in a phone number and combine
two-second and hard pauses.
To dial or save phone numbers with pauses:
1.
Enter all or part of a number.
2.
Press OPTIONS (right softkey) > Hard Pause or 2-Sec. Pause .
3. Enter additional numbers.
Press OPTIONS (right softkey) > Save > New Entry or 
4.
Existing Entry to save the number in your Contacts. 
(See steps 3 and 4 in "Saving a Phone Number" on
page 17.) 
Press to dial the number.
to send the additional number if you selected 
5.
Press
Hard Pause in step 2.
18 2A. Phone Basics

Dialing From the Contacts List

1.
From standby mode, press CONTACTS (right softkey).
2.
Highlight the entry you want to call.
3. Press to dial the entry's default phone number.
– or –
.
Press the navigation key left or right to show another number
for the entry and press
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Press and hold
2.
Dial the country code and phone number you're calling, and
press . The access code for international dialing will
automatically be dialed, followed by the country code and
phone number.
.
to display " + " on your phone screen.