Precor EFX 835 Assembling And Maintaining Manual page 21

Assembling the EFX
9. Attach the cable to the appropriate connector inside the
Connect ...
The console power cable (red
and black, individual leads)
The television cable (black and
round)
The Ethernet cable (black and
flat)
10. Repeat steps 7 through 9 for the remaining cables you
11. Replace the central plastic base cover, then attach the
base of the EFX, as shown in the following illustration and
table.
Figure 6: Cable connection points inside EFX base
want to install.
four buttonhead screws you removed along with the
cover. Tighten the screws completely.
To ...
The power connector on the jack
panel
The coaxial connector on the
jack panel
The eight-connector modular
jack on the jack panel
19