Precor EFX 835 Assembling And Maintaining Manual page 20

18
5. Using a right-angle ³₁₆" hex wrench, remove the four ¹₄" x
6. Remove the tape at the top of the left upright support.
7. Feed one of the cables you want to install down through
8. Pull the end of the cable upward through the opening just
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835
³₄" buttonhead screws securing the central plastic base
cover.
the upright support, then along the inside of the foot
support and back through the central frame member. The
following illustration shows the general path of the cable.
Figure 5: EFX cable path
behind the lift motor, as shown in the previous illustration.