Precor EFX 835 Assembling And Maintaining Manual page 19

Assembling the EFX
3. Attach the left upright support to the base frame using
4. Repeat steps 2 through 4 to attach the right upright
Important: Do not stretch, crimp, or damage the cable.
Cables damaged by improper installation will not be covered
by the Precor Limited Warranty.
Figure 3: Thread cable through upright support
four buttonhead screws, four split washers, and four
⁵₁₆-inch washers. Partially tighten the fasteners.
Figure 4: Attach the upright support to the base frame
support.
17