Console - Olivetti Fax-Lab 480 Instructions Manual

C
ONSOLE
•
•
•
• Gives access to programming mode.
• Selects menus and submenus.
• After the button has been
pressed, the speaker volume is turned
up to maximum and then recom-
mences at the lowest volume.
"Error" LED indicator
Signals an operating fault during transmission or
reception.
12
Adjusts the resolution of the documents to be sent and
copied (only with the document inserted in the ADF).
Puts the line on hold during a telephone conversation (with
the handset off the hook).
Turns off the microphone, during a "handsfree" telephone
call, so that the correspondent cannot hear what is said at
your end of the line.
• They scroll cyclically forwards or backwards through
the functions and related parameters on the menu.
Move the cursor to the "right" and to the "left" while
•
entering numbers and names.
M
ODEL WITH A BUILT
Used to perform TAD functions. Described in the
•
corresponding chapter.
With the handset lifted, gives access to the special
functions made available by the network operator
and commonly known as REGISTER RECALL
(R function).
Blinking, indicates that the memory contains documents that have not been printed.
Off, indicates that the memory is empty.
M -
ODEL WITH A BUILT IN TAD ONLY
On, indicates that there are messages or memos in the memory that have already been
played.
Blinking, indicates that the memory contains documents that have not been printed, messages
or memos that have not been played.
Off, indicates that the memory is empty.
-
IN TAD ONLY
• Dials the fax or telephone number.
• If pressed for more than a second,
(once set) the telephone or fax
number assigned assigned to the key
is automatically dialled (one-touch
dialling function).
• Sets any numeric data.
• Selects digits and alphanumeric
characters during the entry of
numbers and names.
• With tone dialling, a tone is sent down
the line for special network services.
• Selects characters and special
symbols during the entry of names by
scrolling backwards and forwards.