Edit Dmz Host - Billion 400G User Manual

Edit DMZ Host

A DMZ Host is a computer on the LAN that is completely exposed to the Internet. When you have configured a
particular internal IP address as the DMZ Host, all incoming packets will be checked by the routers firewall and
NAT algorithms, and if the packet does not use a port number that has been assigned by any Virtual Server entry,
it will be passed to the DMZ host.
Caution: This local computer, which is exposed to the Internet, may face a variety of security risks.you should make quite
sure that it is adequately protected.
Go to Configuration Virtual Server Edit DMZ Host
Enabled: This option disables the DMZ function.
Disabled: This option enables the DMZ function and is the default setting.
Internal IP Address: When the DMZ function is enabled, supply the static IP address of the DMZ Host. Be
aware that this IP will be exposed to the WAN/Internet.
List all Computers currently connected to the network. You may assign a Computer using its IP
address and/or its MAC address from this list. Select the Apply button to apply your changes.
Chapter 4: Configuration
Billion 400G Router
72