The Rear Ports - Billion 400G User Manual

The Rear Ports

1
The Ethernet Port # 4 can be used as a console port. You need a special console
tool which already includes in the package to connect with LAN port 4 and PC's
RS-232 port (9-pin serial port).
Port
Antenna
1
ADSL
2
LAN
3 1X — 4X
(RJ-45 connector)
4 WPS
5 RESET
Power
6
Power Switch
7
Chapter 2: Installing the router
2
Meaning
Connect the detachable antenna to this port.
Use the supplied RJ-11 ("telephone") cable to connect this port to
the ADSL/telephone wall jack.
T o connect your router to a PC or an office/home network of
10Mbps or 100Mbps use a UTP Ethernet cable (Cat-5 or Cat-5e)
and connect to one of the LAN ports.
Caution: Port 4 can be either a LAN or a Console port at any time but
not simultaneously.
Press the WPS button to trigger Wi-Fi Protected Setup function.
When the router is turned on
Reset the router: press for 1-3 seconds.
Restore factory default settings: press for 6 – 8 seconds, and
power cycle the router: (useful if you cannot login to the router
or have forgotten your Username/Password.)
Caution: After pressing the RESET button for 6 - 8 seconds, be sure
you power cycle the device.
If the RESET button is pressed for more than 10 seconds, the device
will need to be power cycled before normal operation can be resumed.
Connect the supplied power adapter to this jack.
Power ON/OFF switch
Billion 400G Router
3
the reset button is used to:
5
4
6 7
5