Wireless - Billion 400G User Manual

Billion 400G Router
Active PC in LAN displays a list of individual Ethernet device's IP Address & MAC Address which connecting to the
router.
You can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to insert to the
Ethernet Client Filter table. The maximum Ethernet client is 16.

Wireless

Parameters
WLAN Service: Default setting is set to Enable. If you do not have any wireless devices (802.11g or 802.11b) on
your network, select Disable.
Mode: The default setting is 802.11b+g (Mixed mode). If you do not know what type of wireless devises you have,
or have both 11g and 11b devices in your network, then keep the default setting (mixed mode). From the
drop-down menu, you can select 802.11g if you have only 11g clients on your network or if you have only 11b
clients on your network, then select 802.11b.
ESSID: The ESSID is the unique name of a wireless access point (AP) used to distinguish it from other AP's.
For security purposes, change the default AP ID (wlan-ap) to a unique ID name. The ESSID is case sensitive
and must not excess 32 characters. Make sure your wireless clients have exactly the same ESSID as the AP so
that you will be able to connect to it .
27
Chapter 4: Configuration