Wireless Client / Mac Address Filter - Billion 400G User Manual

Wireless Client / MAC Address Filter

The MAC Address supports up to 16 wireless network machines and helps you to manage your network control
to accept traffic from specific authorized machines or to restrict unwanted machine(s) from accessing your LAN.
There are no pre-define MAC Address filter rules; you can add the filter rules to meet your requirements.
Wireless Client Filter: Default setting is set to Disable.
Allowed: T o allow a specific device access to your LAN, insert the devices MAC Address in the space
provided, or click
Blocked: T o prevent unwanted devices from accessing the LAN,
unwanted computer into the space provided, or click
listed.
The maximum number of clients is 16. MAC addresses are 6 bytes long; they are presented only in hexadecimal
format. The numbers 0 - 9 and letters a - f are acceptable. MAC addresses are 6 bytes long
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: This function automatically detects devices connected to the router through the Wireless AP.
A ssociated Wireless Clients
→
Associate Wireless Client displays a list of individual wireless device's MAC Address that are currently connected to
the router.
You can easily add a particular client to the Allow or Block list by checking the box next
to the MAC address and selecting Add to insert to the client into the Wireless Client (MAC Address) Filter table.
Chapter 4: Configuration
. Make sure your computer's MAC is listed.
Billion 400G Router
insert the MAC Address of an
. Make sure your computer's MAC is not
31