Front Panel Presets - MOTU micro express User Manual

As you repeatedly press the button, the LED cycles
through the eight programs.
SELECTING A PRESET ON A MICRO EXPRESS
To select a preset from the front panel:
1 Repeatedly press the SELECT button until the LED for
the program you want lights up.
2 The SELECT button cycles through both the factory
and user presets, as indicated by the red User LED and the
green Factory LED.
FACTORY PRESETS
The eight factory presets provide you with optimum cable
routing, SMPTE, and other settings for various common
situations in which you will use your Express interface.
The eight factory preset settings are listed on the front
panel as shown below:
108
MIDI Express XT front panel preset controls
micro express front panel preset controls
Figure 7-1: The eight factory presets on the front panel of the Express XT and
micro express.
Each factory preset is described in the following sections,
including situations in which you would find it useful.
F R O N T P A N E L P R E S E T S