Chapter 6 Clockworks For Mac Os - MOTU micro express User Manual

WHERE TO GO NEXT
Refer to the items below that apply to you:
If you want to start using MIDI software with your new
MOTU interface...
All MOTU interfaces have factory default settings that
allow your MIDI software to communicate with all MIDI
devices connected to the interface. So from here, you can
turn to your software documentation to get started. If you
haven't created devices in your Audio MIDI Setup as
explained in "Creating a MIDI configuration" on page 18,
do so now before you begin using your MIDI programs.
If you want to learn about the front panel controls...
Turn to chapter 7, "Front Panel Presets" (page 107).
If you want to program your interface with
ClockWorks...
Your MOTU interface console software is the "front end"
for the features in your MOTU interface. It allows you to
configure and program the powerful MIDI routing and
processing features in the interface. You can graphically
make direct routings from inputs and outputs, stripe
SMPTE time code, create and save interface setups (which
I N S T A L L I N G T H E M O T U U S B M I D I S O F T W A R E
consist of the entire internal configuration of the
interface), set up the pedal inputs, or other tasks.For
details, see chapter 5, "ClockWorks For Mac OS X"
(page 29) or chapter 6, "ClockWorks for Mac OS 9"
(page 53).
23