Quick Reference: Microbook Front Panel - MOTU MicroBook IIc User Manual

Quick Reference: MicroBook Front Panel

0
1. Plug in your dynamic or condenser
mic here.
Use the MIC digital rotary encoder
on the top panel (4) to engage the
-20 dB pad (push) and/or 48V
phantom power (push and hold)
for a condenser mic, if necessary.
Make sure 48V power is
turned OFF BEFORE plugging
anything in to the mic input. Only
engage 48V power when a device
that requires it is plugged in.
1
2. Plug in your guitar here using a
standard quarter-inch guitar
cable. This input is designed with
the high-impedance characteris-
tics necessary to properly handle
both passive and active guitar
pickups. To make your guitar
sound and "feel" even more like it
is plugged directly into a actual
guitar amplifier, consider using
MOTU's ZBox guitar impedance
adapter (sold separately), which
simply goes between your guitar
cable and this input (no extra
cable needed).
2
3. This is a standard quarter-inch
headphone jack. To control
volume, push the VOL rotary
encoder (5) repeatedly until the
phones LED is lit. You can control
phone volume independently or
together with main out volume.
To obtain your product
serial number, see
"Obtaining your
MicroBook serial
number" on page 14.
3
4 5