Table of Contents
Advertisement
How to wash correctly
Interrupting a programme
Switch the washing machine off with
the I-ON / 0-OFF button.
To continue with the same programme:
Switch the washing machine back
on again with the I-ON / 0-OFF but-
ton. Altering a programme once se-
lected
The machine will accept the following
changes after a programme has
started:
– at any time after the start, the spin
speed can be changed within the
limits for the programme.
– up to 6 minutes after the start , the
additional functions Water plus
and/or Short can be selected or de-
selected and a different temperature
can be selected for the programme
in use.
After the start of a programme it is no
longer possible to select a different pro-
gramme.
If the programme selector is moved,
the indicator light Anti-crease/Finish will
start flashing. However, the programme
sequence remains unaffected. The indi-
cator light will go out again when the
programme selector is moved back to
the programme previously chosen.
26
Skipping a programme stage
Turn the programme selector to Fin-
ish.
As soon as the programme sequence
indicator light for the programme stage
you want the programme to continue at
starts flashing:
Turn the programme selector back
again to the appropriate programme
within 4 seconds.
Programmes cannot be altered and
programme stages cannot be
skipped if programme locking has
been activated.
Selecting a different pro-
gramme
Switch the washing machine off with
the I-ON / 0-OFF button.
Turn the programme selector to
Finish.
Switch the washing machine back
on with the I-ON / 0-OFF button.
Select a different programme.
Press the START button.
Hide quick links:
Advertisement
Table of Contents
