Table of Contents
Advertisement
Important control panel
features
Programme selector
The programme selector is used to set
the basic wash programme and the
temperature for that programme. The
light ring will go out a few minutes after
the end of the programme to save en-
ergy.
Additional option buttons
Additional options can be added to the
basic programme.
Pressing the relevant button selects or
de-selects the particular option. The in-
dicator light comes on to show that the
additional option has been selected.
If an additional option is chosen which
is incompatible with the basic pro-
gramme then the indicator light will go
out when the button is released.
"Spin" button with indicator lights
The maximum spin speed which can
be selected depends on the basic pro-
gramme chosen.
Maximum
spin
speed
1600 COTTONS, Quick wash, Starch,
Drain/spin
1200 WOOLLENS, Separate rinse
900 MINIMUM IRON, Mixed wash
600 DELICATES
400 Silks
Basic programme
Description of the appliance
Press the "Spin" button to select a dif-
ferent spin speed. However, you can-
not select a spin speed higher than the
maximum allowed for the basic wash
programme chosen.
The indicator lights show the speed se-
lected.
You can also select Without spin to
omit interim spins and the final spin.
Press the "Spin" button to reach:
– Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme:
Select a spin speed.
To finish the programme:
Press the Door button.
– Without spin
Laundry is not spun. Water is drained
away after the final rinse and the ma-
chine goes straight into the anti-
crease stage.
13
Hide quick links:
Advertisement
Table of Contents
