Table of Contents
Advertisement
Before using for the first time
Before using for the first time
Before using the machine for the
first time ensure that it is correctly in-
stalled and connected. See the rele-
vant section under "Installation".
Also check that the fluff filter is se-
curely tightened. Otherwise there is
a risk of water leakage during use.
For safety reasons spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without any
laundry.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus mak-
ing maximum use of the detergent.
The wash programme must be run with-
out detergent. Using detergent could
result in an excessive build-up of foam.
Turn on the stopcock.
Press the I-ON/0-OFF button in.
Turn the programme selector to
COTTONS 40°C.
Press START.
When this programme has finished
your washing machine is ready for
using for the first time.
14
Hide quick links:
Advertisement
Table of Contents
