Top-Up Rinse For Cottons (P10) - Miele W 360 WPS Operating Instructions Manual

Programmable functions
Top-up rinse for COTTONS
(P10)
When this is activated, additional
water flows into the drum at the end
of the main wash and the suds are
cooled down. Hot suds can damage
plastic drainage pipes.
Top-up rinse takes place when tem-
peratures of 95°C and 75°C are se-
lected.
The washing machine is delivered with
the Top-up rinse for COTTONS de-
activated.
1
Follow steps
and store in memory.
The programmable functions are acti-
vated to call up further features not
shown on the control panel by using
the additional option buttons in combi-
nation with the programme selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish.
.
36
7
to to programme
1
Press the additional option buttons
Short and Water plus at the same
time, hold pressed in and . .
2
. . . switch on the machine with the
I-ON / 0-OFF button.
3
Let go of all these buttons. P 0
appears in the display.
4
Turn the programme selector to
Starch:
5
The P will now flash in the display
alternating with the number 10
In addition, one of the following will ap-
pear on the right of the display:
0 = Top-up rinse is deactivated
1 = Top-up rinse is activated
6
Press the START button to change
from one to the other. The display
will change accordingly from 0 to 1
or from 1 to 0 .
7
Switch the washing machine off with
the I-ON / 0-OFF button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.