Fault Messages In The Display - Miele Komfort Operating Instructions Manual

Problem solving guide

Fault messages in the display

Problem
lights up in the
display and
Drain fault
flashes.
lights up in the
display and
Water inlet
fault
flashes.
lights up in the
display and
Waterproof
fault
flashes.
lights up in the
display and
Technical
fault
flashes.
Anti-crease
Chk detergent
flashes in the display.
To switch off the fault message: Switch the machine off with I-On/0-Off button.
34
Possible cause
– The water outlet is
blocked or
restricted.
– The drain hose has
been fixed too high.
– The water inlet is
blocked or
restricted.
The water protection
system has reacted.
There is a fault.
Excessive foam has
built up during
washing.
Remedy
– Clean the drain filter and
the drain pump.
– The maximum delivery
head is 1 m.
Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
– the water pressure is too
low.
Call the Service Department.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given
on the packaging.